@LilMic if you have hypertension issues though that could be one of the reasons high thc cultivars even with the proper terpene profiles can make you feel tired. Those with hypertension are often sensitive to high thc and limonene which can increase hypertension and make you feel tired.
2 Likes
Dude!!! I luv your knowledge. Thanks for sharing
1 Like
@MDBuds hi! Question in your tinctures. How many grams of flower to how much coconut oil do you use?
I have used 16 grams to 1 quart of veg glycerin in the past. Some say it helps with pain. But pancreatitis pain it didnāt. Hoping if I use coconut oil it might work better.
Itās listed in here. 4 grams maximum per liquid ounce. So for a potent infusion I would do 16 grams decarbed cannabis to 4 liquid ounces coconut oil.
1 Like
MDbuds I would like to get your input please.
I like to extract from my bud in olive oil with lecithin like you talked about before. No problems there.
In a nutshell, my method is to use my digital control crockpot. I Float the flowers and the oil and let it simmer about 220Ā° for about 2-6 hours (experimenting). The question comes in the decarboxylation . Iāve done both pre-decarbox of the flowers in the oven in a very similar fashion to what you suggest. The results in the oven first always taste like a bale of hay. And I have also put the raw flowers (bone dry not fresh/wet) straight into the crockpot. The question is, do you think one method is better than the other? I find when I put it into the crockpot to decarboxylate in the olive oil itself; I tend to have a much more flavorful oil. There are way more terpenes in the finished product. When I decarb the buds in the oven, my house smells like the dispensary. I feel like Iām volatilizing off all the terpenes. Do you think if I decarb in my crockpot to hold onto the terpenes Iām selling myself short on potency? I found when I do it this way my batches taste way better, but for what ever reason my potency seems to vary more. Itās not different varieties, Iāll work with the same pound from the same plant. The exact same plant and get varying results. Any tips for me would be greatly appreciated and thank you for your time.
No one I share with notices the difference, just me. I like a little of the oil in my fresh cup of coffee every morning. Thatās how I start my day feeling great. And it bugs the hell out of me I have not been able to nail this down in like 10 years of experimenting.
2 Likes
@Noddykitty you are right that oven decarb loses more terpenes than decarbing in the oil as you infuse because the fats in the oil both protect and bind with terpenes to help preserve more of them.
Here lies the rub. Decarbing in oil is not as efficient as decarbing straight in the oven. It has hot and cold spots and itās hard to get it to the temperature needed without burning the oil or the cannabis on the stove top and doing it in the double boiler you donāt get high enough heat to fully decarb the thc and you get very little of the cbd decarbed.
I have personally been experimenting with something I call a steam decarb to help preserve more terpenes but still get a decent decarb before infusion.
I use an oven. Get two small ceramic bowls. Like those super small ones they serve fancy puddings in at restaurants. Fill them with distilled water and put them on the baking sheet with your ground buds. Make a foil tent over the baking sheet to keep steam in.
Decarb at 240f for approximately 45 to 60 min.
It creates a water vapor layer over the buds and helps preserve some terpenes. Much like using fruit peels or boveda packs to cure/preserve buds.
After that just infuse as normal. Itās a good middle ground between infusion decarb and oven decarb. You get better potency than infusion decarb and preserve more terpenes than traditional oven decarb so itās right in the middle of the two so far in my experiments.
I got the idea from steam distillation methods and eventually will be making a steam decarb still. It will steam distill the cannabinoids and terpenes but the cbd and thc will drop into a decarb chamber from the wick and the terpenes and other hydrocarbons will go to their prospective chambers. Once completed you can mix the pure terpene distillates back into the decarbed thc/cbd distillates after infusion with the carrier oil so you can get the full terpene profile and experience in an edible similar to that of smoking.
3 Likes
Thank you for your thoughts and input. I will try that In my next batch. What you say makes sense.
What do you think would happen if I decarboxylated the flowers normal. Extract my normal way in the oil. And then last minute added some fresh flowers to re-infused with some yummy terpenes. Do you think that would work or it would be a waste of my time?
2 Likes
@Noddykitty that will work well. Iāve done it on multiple occasions. It adds extra steps but itās worth it imo and it also adds more thhca and cbda into the infusion for a more well rounded feco.
The steam decarb was just my way of trying to simplify it and not take those extra steps. Lol
2 Likes
I have a question with people ,growers, consumers who currently struggle with health issues to be specific inflammation! Does any know of are aware a ultimate and most effective strain out there to exist to is absolutely perfect for inflammation and how could it be used to fully take advantage of the medical properties of that strain please and thank you community !
1 Like
@Sirdabzalot unfortunately thereās no one and done ultimate inflammation busting strain. Each strain will effect each individual differently. Also, the treatment for the inflammation varies based on the cause of the inflammation and different strains work better for different types of inflammation.
To better answer your question to help find the best strain for your needs I would need to know the cause of your inflammation. Is it from injury? Auto immune issues? Allergy? Reaction to medication? From hypertension? Etcā¦
The combination of terpenes and cannabinoids needed will be dependent on the cause of the inflammation.
As a broad scope though generally strains high in cbd, caryophyllene, limonene, myrcene, linalool, and other inflammation fighting terpenes will be beneficial for combating all types of inflammation. To find the best one for you though Iād need some questions answered.
1 Like
Specifically gastrointestinal issues inflammation that causes ulcers and gastritis and builds up acid which then leads to nausea and vomiting. Pretty much I am critical when it comes diet due to sensitive stomach
1 Like
@Sirdabzalot is the gastritis a side effect of an auto immune disorder or diabetes? Or is is just from stress and age?
1 Like
Auto immune I think would be most accurate
1 Like
@Sirdabzalot alright. I have a few more questions before I can suggest a strain. Are you currently taking any other medications? Cbd, thc, and certain terpenes can react negatively or positively with certain medications. Do you have high blood pressure or hypertension? High thc and limonene can exacerbate hypertension issues.
Yes Iām taking omeprazole for gastritis and acid also zofran for nausea. I have neither high blood pressure or hypertension.
@Sirdabzalot I would suggest tangerine, Durban poison, cbd mango, amnesia haze autoflower, and other similar strains.
Cbd sour tsunami or cbd white widow would likely work as well.
As far as your medications they should not react with cannabis. Omeprazole has very few studies I have found but so far they do not show any reactions to cannabinoids.
3 Likes
@MDBuds Does it make sense to blend strains when concocting a tincture? I have combined the last few ccs of different alcohol tinctures, and the result seemed kind of muddled. But perhaps a more thoughtful approach might work.
@Bushdoc you can blend cultivars to get the result you need but you need to know what terpene profile each cultivar has. I make a blended rso myself that is a mixture of 5 different cultivars that I hand picked for the needs of myself and my lady.
Have to make sure the terps play nice with each other to get the final result you want.
2 Likes